ATTENTION!!! The minimum overlap must be 30 cm. all over the perimeter to ensure proper functioning. To place your order, take as reference the measurements of the pool and we will add those extra centimeters.

CHARACTERISTICS OF THE TRAMUNTANA BAR COVER - ASTRALPOOL
The aluminum cross bars of the Tramuntana cover, together with its fixing system, constitute the most efficient form of protection against accidental falls of children or pets and guarantee optimal care and hygiene throughout the year by preventing the access of leaves, mosquitoes and others. waste.
It can be used throughout the year, since it not only provides safety against falls but also protects against the dirt typical of each season and reduces the proliferation of bacteria and algae.
WHAT BENEFITS DOES IT PROVIDE?
-Maintenance and cleaning of the water: They avoid both dirt and part of the evaporation and therefore the loss of liters of water. Being opaque, they do not allow microorganisms to develop in it, thus preventing the decomposition of the water.
-Safety: The Tramuntana cover is manufactured according to the FRENCH STANDARD NF P 90-308, which is one more guarantee of its quality and efficiency.
-Saving: This cover pays for itself quickly as we will see a decrease in consumption in maintenance, chemicals, water ... Costs and start-up work are drastically reduced. It allows the water to be reused for several years and avoids having to empty the pool and clean it thoroughly.
MANUFACTURING DATA AND CONTENT
Double layer PVC cover 580g / m2 reinforced with aluminum bars every 1.50 m Approximately.
Joining by high frequency welding.
6 cm double edge welded to the entire length with anti-lift tapes inside included.
Anti-abrasion PVC skids on each bar at the height of the crown.
Tensioning tapes with hooks and pegs in stainless steel.
Holes that allow the evacuation of rainwater throughout the width between the bars. This prevents puddles from forming on the surface.
In accordance with the NFP 90-308 standard.
Delivered in a cardboard box and includes:
- Bar cover in selected finish.
- Stainless steel tensioner.
- Rolling wheels
- De-multiplied crank for winding
- Anchors for tensioning.
- "Allen" key # 2.
- Detailed instruction sheet.
UNWINDING, FIXING AND WINDING SYSTEM:
Unwinding is done simply by pulling the center tape of the cover as shown in the example.

To fix the cover we will use the tapes and rattles until you get the proper tension.

To roll up our cover we will use the multiplied crank that is delivered together with the cover.
For a pool smaller than 9 x 4 m we will use a crank. For pools larger than 9 x 4 M. we will have to use 2 handles.
The cover wraps around the bars resting on the pool's crowning stone.

ROOF MAINTENANCE
For reasons of durability and safety of your cover, it is necessary that the water level in the pool is always at the height of use (2/3 of the skimmer) to relieve the cover in case of overload.
It is advisable to clean the cover at least four times a year with a mild, non-abrasive cleaning product, especially without solvent.
The use of an abrasive sponge is strictly prohibited.
In the rainy season, we must remove the dirt deposited in the evacuation holes to avoid obstructions.
In the event of snowfall, the snow that has remained on the cover will have to be removed, since excessive weight could damage it.