Atención al cliente 
Your cart
There are no more items in your cart
en 
es
fr
it
pt
Hair dryer BASIC 1200W ABS White GENWEC
GW02 01 01 00
€38.91
€48.64
-20%
Tax included
Hot air gun type hair dryer with wall mount. 2 speeds and 3 air temperatures. Safety ON / OFF switch.
White ABS housing with chrome inserts on the gun. Suitable for domestic use and in hotel rooms.
CHARACTERISTICS OF THE GENWEC BASIC 1200W ABS WHITE HAIRDRYER:
Both the support and the gun are made of white ABS plastic.
The base is fastened to the wall by means of two screws, for which it is necessary to make two holes in the wall with a drill diameter of 6 mm.
The base has a general switch on its front with a pilot light next to it that indicates that it is switched on.
At the rear of the gun handle, it has a switch with two positions, "MAX" - motor power and maximum speed, "MIN" - motor power.
To allow the definitive activation of the dryer, the spring-loaded button located on the handle must be permanently pressed, in this way the involuntary activation of the hair dryer is avoided.
The motor is a direct current of 10,000 r.p.m. which provides an air flow of 75 m3 / h at a speed of 55 km / h.
The resistance is 1160W - 230V with thermal limiter.
The total power is 1200W at 230V - 50/60 Hz.
The Projection Protection Index is IPX1. Class II.
The total dimension of the hair dryer is 180x150x100 mm, with a net weight of 0.65 kg.
TECHNICAL CHARACTERISTICS:
Voltage / Frequency: 220-240 V 50/60 Hz
Total power: 1200 W
Resistance power: 1160 W
Motor power: 40 W
Motor type: direct current.
Rotor speed: 10000 r.p.m.
Electrical insulation: Class II
Protection index: IPX1
Resistance overheating thermostat (automatic reset).
MECHANICAL CHARACTERISTICS:
Air flow: 75 m3 / h
Air speed: 55 km / h
Gun and support in white ABS thermoplastic.
Chrome trim on the gun
Protective grid made of polycarbonate.
Cable with plug from bracket, spiral cord type
Set light switch located on the bottom of the base
Speed switch located on gun holder
Choice of two power levels
Safety ON / OFF button.
CHARACTERISTICS OF THE GENWEC BASIC 1200W ABS WHITE HAIRDRYER:
Both the support and the gun are made of white ABS plastic.
The base is fastened to the wall by means of two screws, for which it is necessary to make two holes in the wall with a drill diameter of 6 mm.
The base has a general switch on its front with a pilot light next to it that indicates that it is switched on.
At the rear of the gun handle, it has a switch with two positions, "MAX" - motor power and maximum speed, "MIN" - motor power.
To allow the definitive activation of the dryer, the spring-loaded button located on the handle must be permanently pressed, in this way the involuntary activation of the hair dryer is avoided.
The motor is a direct current of 10,000 r.p.m. which provides an air flow of 75 m3 / h at a speed of 55 km / h.
The resistance is 1160W - 230V with thermal limiter.
The total power is 1200W at 230V - 50/60 Hz.
The Projection Protection Index is IPX1. Class II.
The total dimension of the hair dryer is 180x150x100 mm, with a net weight of 0.65 kg.
TECHNICAL CHARACTERISTICS:
Voltage / Frequency: 220-240 V 50/60 Hz
Total power: 1200 W
Resistance power: 1160 W
Motor power: 40 W
Motor type: direct current.
Rotor speed: 10000 r.p.m.
Electrical insulation: Class II
Protection index: IPX1
Resistance overheating thermostat (automatic reset).
MECHANICAL CHARACTERISTICS:
Air flow: 75 m3 / h
Air speed: 55 km / h
Gun and support in white ABS thermoplastic.
Chrome trim on the gun
Protective grid made of polycarbonate.
Cable with plug from bracket, spiral cord type
Set light switch located on the bottom of the base
Speed switch located on gun holder
Choice of two power levels
Safety ON / OFF button.
Tap to zoom
