• -20%
Hair dryer with shaving plug 1400W...

Hair dryer with shaving plug 1400W GENWEC

GW02 03 01 00
€59.14 €73.93 -20%
Tax included

Hot air gun type hair dryer with wall mount. With two 110 and 230V shaver plugs. 2 speeds and 3 air temperatures. Safety ON / OFF switch.

White ABS housing with chrome inserts on the gun. Suitable for domestic use and in hotel rooms.

COLORS
  • WHITE WHITE
  • BLACK BLACK
Estimated delivery date: 5 April 2024
Estimated delivery date: 8 April 2024
Estimated delivery date: 2 de April 2024

 

CHARACTERISTICS OF THE GENWEC 1400W SHAVED PLUG HAIR DRYER:

    Both the support and the gun are made of white ABS plastic.
    The base is fastened to the wall by means of two screws, for which it is necessary to make two holes in the wall with a drill diameter of 6 mm.
    The base has on its front a general switch with a light on the side that indicates its power on and two 110V plugs, flat plug, and 230 volts, flat or round plug, for shavers.
    The front part of the gun handle has a switch with three positions, 'C' - minimum flow / cold air, '1' - minimum flow / hot air and '2' maximum flow / hot air.
    To allow the definitive activation of the dryer, the spring-loaded button located on the handle must be permanently pressed, in this way the involuntary activation of the hair dryer is avoided.
    The motor is a direct current of 10,000 r.p.m. which provides an air flow of 75 m3 / h at a speed of 55 km / h.
    The resistance is 1160W - 230V with thermal limiter.
    The total power is 1400W at 230V - 50/60 Hz.
    The Projection Protection Index is IPX1. Class II.
    The total dimension of the hair dryer is 280 x 240 x 150mm, with a net weight of 1.2kg.

ELECTRICAL CHARACTERISTICS:

    Voltage / Frequency: 220-240 V 50/60 Hz
    Total power: 1400 W
    Resistance power: 1360 W
    Motor power: 40 W
    Motor type: direct current.
    Rotor speed: 10000 r.p.m.
    Electrical insulation: Class II
    Protection index: IPX1
    Resistance overheating thermostat. (Automatic reset)
    One 110V flat pin shaver plug.
    A 220V flat round pin shaver plug.

MECHANICAL CHARACTERISTICS:

    Air flow: 75 m3 / h
    Air speed: 55 km / h
    Gun and support in white ABS thermoplastic.
    Chrome trim on the gun
    Protective grid made of polycarbonate.
    Cable with plug from bracket, spiral cord type
    Set light switch located on the bottom of the base
    Position switch located on the gun holder.
    Choice of two power levels
    Safety ON / OFF button.

CHARACTERISTICS OF THE GENWEC 1400W SHAVED PLUG HAIR DRYER:

    Both the support and the gun are made of white ABS plastic.
    The base is fastened to the wall by means of two screws, for which it is necessary to make two holes in the wall with a drill diameter of 6 mm.
    The base has on its front a general switch with a light on the side that indicates its power on and two 110V plugs, flat plug, and 230 volts, flat or round plug, for shavers.
    The front part of the gun handle has a switch with three positions, 'C' - minimum flow / cold air, '1' - minimum flow / hot air and '2' maximum flow / hot air.
    To allow the definitive activation of the dryer, the spring-loaded button located on the handle must be permanently pressed, in this way the involuntary activation of the hair dryer is avoided.
    The motor is a direct current of 10,000 r.p.m. which provides an air flow of 75 m3 / h at a speed of 55 km / h.
    The resistance is 1160W - 230V with thermal limiter.
    The total power is 1400W at 230V - 50/60 Hz.
    The Projection Protection Index is IPX1. Class II.
    The total dimension of the hair dryer is 280 x 240 x 150mm, with a net weight of 1.2kg.

ELECTRICAL CHARACTERISTICS:

    Voltage / Frequency: 220-240 V 50/60 Hz
    Total power: 1400 W
    Resistance power: 1360 W
    Motor power: 40 W
    Motor type: direct current.
    Rotor speed: 10000 r.p.m.
    Electrical insulation: Class II
    Protection index: IPX1
    Resistance overheating thermostat. (Automatic reset)
    One 110V flat pin shaver plug.
    A 220V flat round pin shaver plug.

MECHANICAL CHARACTERISTICS:

    Air flow: 75 m3 / h
    Air speed: 55 km / h
    Gun and support in white ABS thermoplastic.
    Chrome trim on the gun
    Protective grid made of polycarbonate.
    Cable with plug from bracket, spiral cord type
    Set light switch located on the bottom of the base
    Position switch located on the gun holder.
    Choice of two power levels
    Safety ON / OFF button.